Larawan Network
DiWa 0118
LSN50v2-S31 -- LoRaWAN Temperature & Humidity Sensor
DiWa 0120
R718MA has a simple positioning function. The device reports its RSSI, SNR information periodically to the gateway. It can be attached to an object, and it sends an alert when it is removed from the premises. The communication is fully compatible with LoRaWAN™ protocol (Class A).
DiWa 0116
The device is a simple positioning function (which can detect the position status of the device), periodically reports RSSI and SNR information to the gateway for processing and can locate the position status of the device according to the reported RSSI and SNR information, and adopts SX1276 wireless communication module.
DiWa 0109
The R720C is a wireless communication device that detects ambient air pressure and temperature. The R720C detects ambient air pressure and temperature and transmits the detected data to other devices via a wireless network using the SX1276 wireless communication module.
DiWa 0110
The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
DiWa 0111
R718N363 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.
DiWa 0112
R718N315 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.
DiWa 0113
R718N325-Wireless 3-Phase Current Meter with 3 x 250A Clamp-On CT
DiWa 0108
LHT65 LoRaWAN Temperature & Humidity Sensor
DiWa 0106
• Embedded location stack (binary); • Gateway firmware, PC/Android app (in source code); This • Out-of-the-box scalable RTLS network solution; • Visualize and configure over Android/PC app; • Customize via APIs, re-flash boards over USB; • X-Y location accuracy: typically +/- 1 meter; • Receiver mode coverage range: 20 meters; and • Battery life: 6 hours, approximately. • Extension Power size: 74 x 154 x 33 mm
DiWa 0105
Omni Directional Mounting support for pole or wall Extend 60cm N-Female to SMA plug cable.
DiWa 0104
The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
DiWa 0103
The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
DiWa 0102
Smart Buildings & Home Automation Logistics and Supply Chain Management Smart Metering Smart Agriculture Smart Cities Smart Factory
DiWa 0101
LoRaWAN temperature and humidity sensor AN-103A AN-103A LoRaWAN Temperature and Humidity Sensor is a wireless temperature and humidity acquisition. It is designed for temperature and humidity monitoring and alarm. It comply with LoRaWAN standard communication protocol and integrates data acquisition and monitoring. With built-in temperature and humidity sensor chip, it has high detection accuracy, stable performance with low power consumption. It has long transmission distance and reliable signal output.